Xref: utzoo comp.sys.att:12004 comp.dcom.lans:7501
Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!ux1.cso.uiuc.edu!news.iastate.edu!ceres.physics.uiowa.edu!zaphod.mps.ohio-state.edu!caen!hellgate.utah.edu!fcom.cc.utah.edu!npd.novell.com!newsun!saddison
From: saddison@ca.excelan.com (Skip Addison)
Newsgroups: comp.sys.att,comp.dcom.lans
Subject: Re: MSDOS Starlan Client
Message-ID: <1991Mar15.155936.17681@novell.com>
Date: 16 Mar 91 12:35:42 GMT
Sender: news@novell.com (
Lines: 22

The News Manager)
Nntp-Posting-Host: ca
Reply-To: saddison@ca.excelan.com (Skip Addison)
Organization: Novell, Sunnyvale, CA
References: <1991Mar12.212430.12473@mccc.edu> <1991Mar14.191415.7062@cfctech.cfc.com>
Date: Fri, 15 Mar 1991 15:59:36 GMT

In article <1991Mar14.191415.7062@cfctech.cfc.com> norm@cfctech.cfc.com (Norman J. Meluch) writes:
> ...
>Of course this fix [using loadhi to load software in HI RAM] only works 
>well on a 386 AT bus clone.  Microchannel PCs
>don't really have enough high memory available to be much help, and 286/XT
>type machines don't often have a loadhi ability available.
> ...

Not quite true.  I'm using loadhi on a 286 machine now, but it requires
an expanded memory board with HARDWARE SUPPORT for LIM 4.0.  Many 
expanded memory boards only have partial support for LIM 4.0.  At my local
Fry's Electronics, the boards without the necessary support were $80-100.
The one board they had which would create "HI RAM" was $195.  We needed
the hi memory and the board was cheaper than buying a new computer, so....
It's working fine using LOADHI on a network.

-- Skip