Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!uunet!brunix!omh
From: omh@cs.brown.edu (Owen M. Hartnett)
Newsgroups: comp.sys.mac.hardware
Subject: Re: Mac+ Monitor going bad
Message-ID: <68622@brunix.UUCP>
Date: 15 Mar 91 00:00:48 GMT
References: <1096@anaxagoras.ils.nwu.edu> <1991Mar9.194446.8378@contact.uucp> <18376@milton.u.washington.edu>
Sender: news@brunix.UUCP
Reply-To: omh@cs.brown.edu (Owen M. Hartnett)
Organization: Brown University Department of Computer Science
Lines: 11

That advice is fairly good, except that you shouldn't just reheat the
old solder, you should *remove* the old solder with a desoldering tool
(radio shack horribly colored blue/yellow vacuum pump) and completely
resolder the pins, otherwise it happens again.

-Owen

Owen Hartnett				omh@cs.brown.edu.CSNET
Brown University Computer Science	omh@cs.brown.edu
					uunet!brunix!omh
"Don't wait up for me tonight because I won't be home for a month."