Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!dimacs.rutgers.edu!seismo!ukma!wuarchive!sdd.hp.com!spool.mu.edu!cs.umn.edu!ariel.unm.edu!pprg.unm.edu!topgun!mustang!data.nas.nasa.gov!eagle!lims01.lerc.nasa.gov!sctsar
From: sctsar@lims01.lerc.nasa.gov (WILLIAM TSARONES)
Newsgroups: comp.sys.mac.hardware
Subject: Internal HD SCSI ID#
Message-ID: <1991Mar15.131643.21692@eagle.lerc.nasa.gov>
Date: 15 Mar 91 14:14:35 GMT
Sender: news@eagle.lerc.nasa.gov
Reply-To: sctsar@lims01.lerc.nasa.gov
Distribution: usa
Organization: NASA Lewis Research Center
Lines: 10
News-Software: VAX/VMS VNEWS 1.3-4

Would someone describe in detail how to change the SCSI ID# of what started 
out as an Apple Quantum internal 40 meg hard drive with ID# 0.

I have found 6 sets of jumper pins on the electronics board and am guessing 
that this is where it's done. I am in the process of turning this drive 
into an external.

Thanks in advance.

Bill Tsarones