Path: utzoo!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!news.cs.indiana.edu!ux1.cso.uiuc.edu!rogers
From: rogers@ux1.cso.uiuc.edu (Bill Rogers)
Newsgroups: comp.sys.novell
Subject: Autoexec dies during remote boot with packet driver?
Message-ID: <1991Mar18.153110.9114@ux1.cso.uiuc.edu>
Date: 18 Mar 91 15:31:10 GMT
Organization: University of Illinois at Urbana
Lines: 27

We are trying to use the packet driver (version 7.6) for the western digital
8003eb board. If we boot from the floppy in which we did the dosgen then 
everything works fine. Using the remote reset, the autoexec exits after net3
and won't do the following login command. Everything else works fine after that.
I've tried several hundred variations on this theme, but not the right one. 
Can anyone help?
Here is the last version I tried:

config.sys:

buffers=25
files=40
lastdrive = e

autoexec.bat:

wd8003e -d -n 0x60 3 0x280 0xd000
ipx                      <- BYU ipx packet driver v2.01 - 890427
net3                     <- Plain old net3 that works otherwise. Dies here.
f:                       <- Never gets here, although default drive is now f:
login student            <- This works fine, if entered now.

Thanks,
Bill
 rogers@ux1.cso.uiuc.edu
 rogers@vmd.cso.uiuc.edu
 rogers@UIUCVMD