Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!uwm.edu!linac,att!cbnewsl!thain
From: thain@cbnewsl.att.com (gregory.g.thain)
Newsgroups: comp.sys.nsc.32k
Subject: LEDS, camera, ...
Message-ID: <1991Mar19.023601.1018@cbnewsl.att.com>
Date: 19 Mar 91 02:36:01 GMT
Organization: AT&T Bell Laboratories
Lines: 18



	My pc532 is almost working!  After many months of obtaining parts,
tools, a diploma and gainful employment, I find myself with my pc532
fully soldered.  At power-on time, all 4 LEDS light, but nothing on the
terminal.  Any suggetions?  Time to go over the board, and look for
cold joints (again?).  What is the order of the things that the monitor
does?  i.e. If the LEDS come on, how much has sucessfully executed?

	On the software front, now that MACH 3.0 for the 386 has been
freed and released, does anyone out there with relevant experience have
any idea how much effort porting it to our baby would be? I assume that
this is what project GNU will use for their kernel?

-Greg Thain
...!att!cbnea!thain
thain@cbnea.att.com
	Working (and Speaking) _at_, not _for_ AT&T Bell Labs.