Path: utzoo!news-server.csri.toronto.edu!rutgers!att!emory!swrinde!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!csn!boulder!bohemia!p1.f477.n104.z1.METRONET.ORG!Jeff.Tensly
From: Jeff.Tensly@p1.f477.n104.z1.METRONET.ORG (Jeff Tensly)
Newsgroups: comp.windows.ms
Subject: 386 Enhanced Problem.
Message-ID: <77.27DF83E0@bohemia.metronet.org>
Date: 14 Mar 91 12:25:00 GMT
Sender: ufgate@bohemia.metronet.org (newsout1.26)
Organization: FidoNet node 1:104/477.1 - Jaguar's Networking, Denver CO
Lines: 25



 BE> Why is it that I can run Windows in Real and Standard Mode, but not 386
 BE> Enhanced?  My system is a 25MHz 386, 84MB SCSI HD, 2 MB Ram, QEMM 5.11.
 BE> Every time I try to run in Enhanced Mode, I get Disk Read Error, Abort
 BE> Ignore Retry Fail.  The other modes work just fine!  Also, anybody out
 BE> there have docs on the Seagate ST-01 card?  Mine didn't come with them.

 BE>                                  -Brian

Could be one of several things, MS states that not all SCSI devices are compatable with the 386 enhanced mode.  Also what controller are using for the SCSI drive?  If it is a 8 bit controller that may be your problem.  I am assuming here that you may be using a seagate 296n with a st01 or st02 controller.  There is not much to know about the st01 card, what is question? I have some information on it.  If you want to run in 386 enhanced mode you will probably have to change to a 16 bit controller, the st01 








is only a 8 bit card.

73 De Jeff, CEO/SysOp Jaguar's Networking Labs (303)377-2371


--- XRS! 4.00+DV
 * Origin: Jag's Point Place, QBBS 2.75g HST/DS, Denver (Quick 1:104/477.1)

--  
=============================================================================
Jeff Tensly - via MetroNet node 200:5000/301 
The Bohemia BBS System, Boulder Colorado (303)449-8946
UUCP:  Jeff.Tensly@p1.f477.n104.z1.METRONET.ORG
 or :  ...!boulder!bohemia.METRONET.ORG!1!104!477.1!Jeff.Tensly
=============================================================================