Path: utzoo!news-server.csri.toronto.edu!rutgers!att!pacbell.com!decwrl!pa.dec.com!e2big.mko.dec.com!drift.dec.com!wood
From: wood@drift.dec.com (John F. Wood)
Newsgroups: sci.electronics
Subject: Re: Favorite LCD display?
Message-ID: <1991Mar13.132527.3957@e2big.mko.dec.com>
Date: 13 Mar 91 13:25:58 GMT
Sender: guest@e2big.mko.dec.com (Guest (DECnet))
Organization: Digital Equipment Corporation
Lines: 22


In article <548@cow.ecs.oz>, bmp@cow.ecs.oz (Bruce Paterson) writes...
>There is a special sequence to follow on reset to ensure the module is
>in a known state. Only some companies brochures actually mention it. Mail
>me if interested.

I tried sending mail, but can't reach you at your listed address.  Please
either mail or post this information.

Thanks,

John
----------------------------------------------------------------------
John F. Wood                  | EIS Engineering
Digital Equipment Corporation | ARPAnet: wood@drift.enet.dec.com
Continental Blvd.             | EASYnet: DRIFT::WOOD
MKO2-1/J12                    | Usenet : ...!decwrl!drift.enet!wood
Merrimack, NH  03054          | AT&T   : (603) 884-4686
----------------------------------------------------------------------
Disclaimer: Views expressed herein are my own and do not necessarily
            reflect those of my employer.
----------------------------------------------------------------------