Path: utzoo!attcan!uunet!bellcore!att!linac!uwm.edu!zaphod.mps.ohio-state.edu!samsung!rex!uflorida!gatech!usenet.ins.cwru.edu!peregrine!data.nas.nasa.gov!nas.nasa.gov!ayee
From: ayee@nas.nasa.gov (Arnold M. Yee)
Newsgroups: sci.electronics
Subject: Making PC boards from scratch
Keywords: PC boards
Message-ID: <1991Feb15.011933.27323@nas.nasa.gov>
Date: 15 Feb 91 01:19:33 GMT
Sender: news@nas.nasa.gov
Reply-To: ayee@nas.nasa.gov (Arnold M. Yee)
Organization: NASA Ames Research Center
Lines: 12

The subject lines pretty much sums it up.  I need information on
designing and etching PC boards.  What methods are available and
which ones are the easiest/give the best results, etc.

Thanks in advance,
--Arnold
--------------------------------------------------------------------------
Arnold M. Yee                                Computer Sciences Corporation
ayee@nas.nasa.gov                            NASA Ames Research Center
 ...!ames!amelia!ayee                        Mail Stop 258-6
415-604-4315                                 Moffett Field, CA 94035-1000
--------------------------------------------------------------------------