Xref: utzoo comp.sys.ibm.pc.hardware:6529 sci.electronics:18508
Path: utzoo!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!uafhp!engr.uark.edu!ras2
From: ras2@engr.uark.edu (Richard A. Smith)
Newsgroups: comp.sys.ibm.pc.hardware,sci.electronics
Subject: Schematics
Keywords: ibm, amiga
Message-ID: <6153@uafhp.uark.edu>
Date: 16 Mar 91 00:43:50 GMT
Sender: netnews@uafhp.uark.edu
Followup-To: poster
Lines: 24


	I am looking for a source of schematics for and/or servicing info on  
clone products for AT/286, 386, 486 type systems.  I have found a source of     
motherboards, ram cards, HD/Floppy controlers, HD's.  But nothing that you
buy Cheap is guarnteeded to work.  Me being the EE student i am should be
able to repair most of the boards that are not totally distroyed and my
lobor is free.  But I have no idea where to get information on the nitty
gritty stuff like the actual working of the support chips with the MPU,
I know alot agbout the concepts and such frim my EE classes but as far as 
the actual layout of the board and what each chip does I am at somewat of 
a loss.
 
	Does anybody know where I can find a source of Service notes for
semi-outdated (1985 type stuff) computer equipment? 

Please post or respond the address below

Thanx in advance,
Richard ras2@engr.uark.edu

-- 
Richard A. Smith                      | Dont look at me, I'm still an 
ras2@engr.uark.edu                    |    undergrad!!
University of Arkansas @ Fayetteville | Disclamer: I'm a college student.