Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rice!uw-beaver!milton!sumax!amc-gw!pilchuck!nwnexus!apex!markm
From: markm@apex.com (Mark McDonald)
Newsgroups: comp.dcom.modems
Subject: SunOS 4.1 uucp => tb+
Message-ID: <1991Mar20.012930.25286@apex.com>
Date: 20 Mar 91 01:29:30 GMT
Reply-To: markm@apex.com (Mark McDonald)
Followup-To: comp.dcom.modems
Distribution: na
Organization: Apex Computer
Lines: 98


	Setup: Sun 3/160 running SunOS 4.1. 
	       Incomm MNP5 modem

	Problem: I'm unable to successfully transfer data via
	uucp between this machine and another machine (386 running
	Xenix (HDB uucp).  I can connect via tip or cu and get an
	interactive login going just fine.

	I can also connect with a 286 running Xenix (HDB) and a 2/120
	running SunOS 3.5 (V3 uucp). With both the 286 and the 2/120
	uucp will run and transfer data for hours on end without a hitch.
	This is using this same Incomm MNP5 modem and the same phone line.

	The 3/160, however, is able to log in, but then immediately fails
	with the following error:

	
	wmesg 'U'g
	omsg "Ug"
	pkcget: alarm 1
	Alarm while looking for SYN -- request RXMIT
	pkcget: alarm 2
	Alarm while looking for SYN -- request RXMIT
	.....
	(the entire log is included below)

	All suggestions and RTFMs (with pointers) gratefully accepted.

	

        ============================================================
        |  Mark McDonald                           Apex Computer   | 
        |  markm@apex.com                          (206)867-1900   |
        |  #include <std.disclaimer.h>             Eph. 1:4-5      |
        ============================================================

	+++++++++++ uucp log follows.


aliasFind (apex) FAIL
mchFind called (apex)
list (rmail) num = 1
name (apex) not found; return FAIL
list (rmail) num = 1
name (OTHER) not found; return FAIL
_Request (FALSE), _Switch (TRUE), _CallBack (FALSE), _MyName (), _Commands rmail
chdir(/var/spool/uucp/apex)
conn(apex)
Device Type ACU wanted
mlock cua0 succeeded
fixline(6, 4800)
processdev: calling setdevcfg(uucico, ACU)
gdial(hayes) called
expect: ("")
got it
sendthem (DELAY
APAUSE
<NO CR>TE1V1X1Q0S2=255S12=255^M)
expect: (OK^M)
ATE1V1X1Q0S2=255S12=255^M^M^JOK^Mgot it
sendthem (ECHO CHECK ON
<NO CR>A^JATTDDTT88883344229922^M^M)
expect: (CONNECT)
^M^JCONNECTgot it
getto ret 6
expect: (in:)
 2400^M^J^M^M^M^Jlogin:got it
sendthem (xxxxx^M)
expect: (word:)
 bones^M^M^JPassword:got it
sendthem (xxxxx^M)
imsg >^M^J^M^J^M^J               Welcome to xxxxx (xxxxx) : XENIX System V/386^M^J^M^J^M^J^PShere=apex^@Login Successful: System=apex
omsg "Sbones -x7"
imsg >^PROK^@msg-ROK
 Rmtname apex, Role MASTER,  Ifn - 6, Loginuser - root
rmesg - 'P' imsg >^PPg^@got Pg
wmesg 'U'g
omsg "Ug"
pkcget: alarm 1
Alarm while looking for SYN -- request RXMIT
pkcget: alarm 2
Alarm while looking for SYN -- request RXMIT
pkcget: alarm 3
Alarm while looking for SYN -- request RXMIT
pkcget: alarm 4
Alarm while looking for SYN -- request RXMIT
pkcget: alarm 5
Alarm while looking for SYN -- request RXMIT
exit code 15                                <== (I killed it right here.)
Conversation Complete: Status FAILED

TM_cnt: 0
-- 

  ============================================================
  |  Mark McDonald                           Apex Computer   | 
  |  markm@apex.com                          (206)867-1900   |