Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!tut.cis.ohio-state.edu!pacific.mps.ohio-state.edu!linac,att!bellcore!porthos!pyuxp!karent
From: karent@pyuxp.uucp (25833-Karen Theisen(F510)m000)
Newsgroups: comp.dcom.sys.cisco
Subject: need help on cisco terminal server
Keywords: terminal server
Message-ID: <1991Mar19.140834.9779@porthos.cc.bellcore.com>
Date: 19 Mar 91 14:08:34 GMT
Sender: netnews@porthos.cc.bellcore.com (USENET System Software)
Distribution: usa
Organization: Bellcore, Livingston, NJ
Lines: 23


I installed a cisco terminal server that has one ethernet board and
32 serial lines.  This device is dedicated for printing.  Therefore,
I have all 32 lines configured as modem callout and no login.
I also group them into four rotaries, each to a micom node (becasue 
all our printers are off micom nodes and we don't want to reconnect 
all printers). 

Anyway,  two things that I would like to do and don't know the
best way to do it:

1.  I would like to "event log" all activities that coming from 
    ethernet to serial ports for trouble shotting. (I have 
    no login on all ports).
2.  I would like to test all 32 lines to make sure physically they
    are OK. (With rotary, I always get the first available one
    and I can't select a certain line.)

Any info on an easy way to do the above will be highly appreciated!!!

Karen Theisen
(908) 699-5161
karent@bcr.bellcore.com