Xref: utzoo comp.binaries.ibm.pc.d:13225 comp.graphics:16814
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!udel!haven!decuac!shlump.nac.dec.com!e2big.mko.dec.com!drift.dec.com!wood
From: wood@drift.dec.com (John F. Wood)
Newsgroups: comp.binaries.ibm.pc.d,comp.graphics
Subject: Re: v10i246: eedraw20, engineering drawing tool
Message-ID: <1991Mar23.162006.21381@e2big.mko.dec.com>
Date: 23 Mar 91 16:21:35 GMT
Sender: guest@e2big.mko.dec.com (Guest (DECnet))
Organization: Digital Equipment Corporation
Lines: 28


Is there any way to get a netlist capability from eedraw?

I like the program (thanks for distributing it), but I want to minimize the
possibility of errors when building the actual device.  A netlist gives me
a list of wires to wrap and will help (all I have to do is hit the right
pins with the wire-wrap gun, which is no small task).  It will also be
useful for input to an autorouter when it comes time to make a PC board.

I didn't see anything that described the internal file format (although I
could have missed it).

Any ideas?

Thanks,

John

----------------------------------------------------------------------
John F. Wood                  | EIS Engineering
Digital Equipment Corporation | ARPAnet: wood@drift.enet.dec.com
Continental Blvd.             | EASYnet: DRIFT::WOOD
MKO2-1/J12                    | Usenet : ...!decwrl!drift.enet!wood
Merrimack, NH  03054          | AT&T   : (603) 884-4686
----------------------------------------------------------------------
Disclaimer: Views expressed herein are my own and do not necessarily
            reflect those of my employer.
----------------------------------------------------------------------