Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac,att!cbnewse!jamesj
From: jamesj@cbnewse.att.com (james.h.jennings)
Newsgroups: comp.sys.3b1
Subject: Re: help with my EIA combo board
Message-ID: <1991Mar19.163411.17948@cbnewse.att.com>
Date: 19 Mar 91 16:34:11 GMT
References: <638@av8tr.UUCP>
Distribution: usa
Organization: AT&T Bell Laboratories
Lines: 33

In article <638@av8tr.UUCP> elliston@av8tr.UUCP (Keith Elliston) writes:
>Hello
>
>I recently posted about problems with my 7300 (av8tr), and have decided
>to take some of the advice.  So, I took out my 512K expansion boards (2),
>populated the EIA combo with 1.5, and thoroughly cleaned out the machine
>(the infamous Dust Bunny treatment).  I also made sure all my connections to
>the powersupply and disk were good.
>
>One problem so far...  I don't know how to configure the jumpers on the
>combo board for 1.5 Mb.  I only get 0.5 out of it.  So, could some kind
>soul tell me how to configure the board for 1.5?  I installed 36 addtn'l
>256k/80ns chips on the board.
>
>Thanks
>
>Keith

I just recently added memory to my combo card.  Leave jumper W2 where it
is and move jumber W3 to W1 (i.e., jumbers should be at locations W1 and
W2).  Hope this helps.

	James Jennings
	...att!ihlpf!jhj
		or
	...att!abacab!shrlok!jhj
>
>
>-- 
>Keith O. Elliston          elliston@av8tr.UUCP           elliston@msdrl.com
>AA5A N9734U                elliston@mbcl.rutgers.edu     elliston@biovax.bitnet
>"Beware of pseudo-experts with a mission and a grudge, especially if they are
> lawyers pretending to be scientists." -- H.W. Lewis in 'Technological Risk'