Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!uunet!vtserf!morpheus!frank From: frank@morpheus.UUCP (Frank McPherson) Newsgroups: comp.sys.amiga.hardware Subject: Re: Hardrives and the A3000 Message-ID: Date: 19 Mar 91 13:12:40 GMT References: <27494@uflorida.cis.ufl.EDU> <1991Mar18.204049.9791@en.ecn.purdue.edu> Organization: Virginia Polytechnic Institute Lines: 25 In article <1991Mar18.204049.9791@en.ecn.purdue.edu> wwarner@en.ecn.purdue.edu (William A Warner) writes: > >I am still having the same problem, too! >I finally received SOME e-mail from a CBM guy who asked the same questions: > 1. Termination on last HD in SCSI chain? > 2. Is 2nd HD spinning up in time? > 3. Is reselection bit set to "NO" on both? > >Of course I have answered these questions a <1000...> times. 8) >I wish CBM would just admit the problem is hw and not setup/operator error! > >-- >Art Warner >wwarner@en.ecn.purdue.edu >Amiga makes it happen.......IBM, Mac, Sun, and Next make it expensive! -- How are you so absolutely positive that it's a hardware problem, and not an operator problem? I am posting this article from an Amiga 3000 with TWO internal hard drives. One is in the rear bay, a Quantum 105. The other is in the second floppy bay (had to drill some extra holes for it) and is a Quantum 170. I've never had any problems with my drives. -- Frank McPherson INTERNET: emcphers@fox.cs.vt.edu --