Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!rex!ukma!seismo!dimacs.rutgers.edu!rutgers!cbmvax!cbmehq!cbmger!peterk From: peterk@cbmger.UUCP (Peter Kittel GERMANY) Newsgroups: comp.sys.amiga.hardware Subject: Re: 1084 monitor and A3000 Message-ID: <987@cbmger.UUCP> Date: 20 Mar 91 19:34:34 GMT References: Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY) Organization: Commodore Bueromaschinen GmbH, West Germany Lines: 15 In article andrewsr@remus.rutgers.edu (Rich Andrews) writes: > >Does the monitor used for the A1000s (and others I guess) work with >the A3000? (I realize that, because it is not a multisync, it will >still flicker). Can I just plug it in, or do I have to have some type >of adapter? Yes, you can plug it directly to the A3000. The A3000 has the same monitor outlet as the earlier models. You only can't use some of the new display modes. Well, you may try SuperHiRes, but you won't gain anything from it. And Productivity is impossible, too. -- Best regards, Dr. Peter Kittel // E-Mail to \\ Only my personal opinions... Commodore Frankfurt, Germany \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk