Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!unix.cis.pitt.edu!dsinc!bagate!cbmvax!cbmehq!cbmger!peterk From: peterk@cbmger.UUCP (Peter Kittel GERMANY) Newsgroups: comp.sys.amiga.hardware Subject: Re: 1.2 Print driver for 24-pin NEC Pinwriter (P2200XE) Message-ID: <989@cbmger.UUCP> Date: 20 Mar 91 20:08:54 GMT References: Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY) Distribution: comp.sys.amiga.hardware Organization: Commodore Bueromaschinen GmbH, West Germany Lines: 25 In article m1jcf00@fed.frb.gov (Jeff Fuhrer) writes: > >I have been trying to run a music program (Deluxe Music Construction >Set-DMCS) on my Amiga 1000. The program runs fine, but I can't print >because (my best guess is) DMCS can't read the 1.3 printer driver for >my NEC P2200XE. Does anyone know where I can get a 1.2 printer driver >for this printer (or know of any other reason why this program can not >print on my system? I have already copied the 1.3 driver into my >Workbench:devs/printers directory)? Thanks! This is a bit strange. If you have a 1.3 system, you also should use 1.3 printer drivers. I'm not sure whether a mix of 1.2 printer drivers would at all work under a 1.3 system. Now if you really want to change to 1.2 printer drivers, there are TWO things to do: 1. Copy the 1.2 "devs:printer.device" to your Workbench (or DMCS disk) 2. Copy the 1.2 driver "devs:printers/MPS2xxx#?" to your disk (But deep in my head I remember some other people posting quite different solutions for this DMCS problem...) -- Best regards, Dr. Peter Kittel // E-Mail to \\ Only my personal opinions... Commodore Frankfurt, Germany \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk