Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!gatech!mcnc!uvaarpa!vger.nsu.edu!manes
From: manes@vger.nsu.edu ((Mark D. Manes), Norfolk State University)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Hardrives and the A3000
Message-ID: <771.27e9d975@vger.nsu.edu>
Date: 22 Mar 91 14:16:20 GMT
References: <1991Mar19.222827.16244@en.ecn.purdue.edu> <17727@crdgw1.crd.ge.com> <13569@helios.TAMU.EDU> <2637@sirius.ucs.adelaide.edu.au>
Lines: 21

In article <2637@sirius.ucs.adelaide.edu.au>, jpotter@ucs.adelaide.edu.au (Jonathan Potter) writes:
> The only way I know of to access both boot partitions at once is to use the
> HDToolBox program provided and change the boot priorities (or something similar)
> 
> You also may be able to Mount the partition by setting up a mountlist entry
> using the scsi.device - get the cylinder information from HDToolBox.
> 
> Jon.

It is very simple actually.  Turn your A3000 off, turn it on again while
holding both mouse buttons.  Now insert your floppy kickstart disk.  Now
insert your floppy Workbench 2.0.  whalla...  all partitions are visiible.
 
 -mark=
     
 +--------+   ==================================================          
 | \/     |   Mark D. Manes   "Mr. AmigaVision,  The 32 bit guy"
 | /\  \/ |   manes@vger.nsu.edu                                        
 |     /  |   (804) 683-2532    "Make up your own mind! - AMIGA"
 +--------+   ==================================================