Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!tut.cis.ohio-state.edu!rutgers!cbmvax!cbmehq!babylon!rbabel
From: rbabel@babylon.rmt.sub.org (Ralph Babel)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: GVP Acceloraters
Message-ID: <06719.AA06719@babylon.rmt.sub.org>
Date: 20 Mar 91 21:37:09 GMT
References: <06699.AA06699@babylon.rmt.sub.org> <18d4fcbb.ARN0f1d@cbmami.UUCP> <1449@rust.zso.dec.com>
Reply-To: cbmvax.commodore.com!cbmehq!babylon!rbabel (Ralph Babel)
Lines: 12

In article <1449@rust.zso.dec.com>, davis@soomee.zso.dec.com
(Mark Davis) writes:

>> - revision 7 and later boards can use a small utility
>>   program to switch back to 68000 mode by software.
>
> Where can this utility be found?

It should be on GVP's latest installation disk. Otherwise
give Tech Support a call.

Ralph