Path: utzoo!utgpu!news-server.csri.toronto.edu!helios.physics.utoronto.ca!ists!yunexus!philip From: philip@yunexus.yorku.ca (Phil McDunnough) Newsgroups: comp.sys.apple2 Subject: Re: Laserprinters Message-ID: <22037@yunexus.YorkU.CA> Date: 19 Mar 91 20:58:51 GMT References: Sender: news@yunexus.YorkU.CA Organization: York University, Toronto, Ont. Lines: 19 In article kimbrennan@gnh-starport.cts.com (Kim Brennan) writes: [material related to printing to a Postscript printer, references to Appletalk and how to deal with Appletalk and the Zip] I have been printing from a GS to an Appletalked LW( and also via the serial port) for ages. Recently when I switched from a TWGS to a Zip GSX, I found I was having problems. You can of course slow the Zip down and enable the Appletalk delay. But this is no longer necessary. Go to tybalt, or have a look on comp.binaries.apple2 for Ziptalk1.0. This is a PIF( place in System.Setup) which allows you to run at any speed over an Appletalk network. We all owe a great deal to Todd Whitesell for solving this problem. I have used it with a 10/64k Zip GSX over Appletalk for printing, accessing servers, using Public Folder GS,etc... As far as I'm concerned this solves the Zip Appletalk issue. Philip McDunnough University of Toronto philip@utstat.toronto.edu