Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!hplabs!hpcc05!hpsgm2!vanmick
From: vanmick@hpsgm2.sgp.hp.com (Van Der Beek Michael-Leo)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Need Help : Syquest+SCSI card not reqconised
Message-ID: <70002@hpsgm2.sgp.hp.com>
Date: 20 Mar 91 03:04:05 GMT
Organization: HP Singapore
Lines: 16

Hello all,

	I need help with my Syquest Removeable HD (44Mb). After, I installed
the ST01 SCSI card into a slot and connected the power cables to the Syquest,
I also put device=syq55.sys into the config.sys file.
	When I turned on my computer, I gave and error like Syquest not found:
No partion made in DOS.
	I have a 386-33Mhz and 4Meg ram and AMI bios. I have a Maxtor 80Meg
HD (19ms). I hope someone can give me some information on this. Is it possible
there is a conflict of cards or that the ST01 cannot work on a fast clock speed.
I hope it is not that the card has been killed by some surge of static during
installation. 

	Please reply soon. Thanks in advance.

Michael