Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!uunet!amgraf!brian386!news
From: news@brian386.uucp (News Administrator)
Newsgroups: comp.sys.novell
Subject: Re: Autoexec dies during remote boot with packet driver?
Message-ID: <1991Mar21.042351.3841@brian386.uucp>
Date: 21 Mar 91 04:23:51 GMT
References: <1991Mar18.153110.9114@ux1.cso.uiuc.edu>
Organization: McCane Consulting
Lines: 17

In article <1991Mar18.153110.9114@ux1.cso.uiuc.edu> rogers@ux1.cso.uiuc.edu (Bill Rogers) writes:
[Stuff deleted]
>
>autoexec.bat:
>
>wd8003e -d -n 0x60 3 0x280 0xd000
>ipx                      <- BYU ipx packet driver v2.01 - 890427
>net3                     <- Plain old net3 that works otherwise. Dies here.
>f:                       <- Never gets here, although default drive is now f:
>login student            <- This works fine, if entered now.
>

Have you checked your PATH to make sure there are no files called net3.bat
somewhere before net3.com.  If this is the problem, you will need to add
"call" in front of net3, or else remove net3.bat.

	brian