Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!bcm!lib!SPH0301@UTSPH.HSCH.UTEXAS.EDU
From: sph0301@UTSPH.HSCH.UTEXAS.EDU
Newsgroups: comp.windows.ms
Subject: Re: 386 Enhanced Problem.
Message-ID: <00945F21.91968F60@UTSPH.HSCH.UTEXAS.EDU>
Date: 21 Mar 91 21:23:53 GMT
References: <77.27DF83E0@bohemia.metronet.org>,<13479@helios.TAMU.EDU>
Sender: usenet@lib.tmc.edu
Reply-To: sph0301@UTSPH.HSCH.UTEXAS.EDU
Organization: University of Texas School of Public Health
Lines: 11
Nntp-Posting-Host: utsph.hsch.utexas.edu

I'm using QEMM5.1 with Windows 3.0 in enhanced mode and it works fine -
granted, it took a bit of playing with, but now I'm running QEMM,
DEC PCSA, WP Office Shell, and THEN running Windows from the shell
and it still works.  One thing I found was that I couldn't load any-
thing in expanded memory using the PCSA EMSLOAD program - that was
sure to limit Windows to Standard (or even real) mode.  Use LOADHI
as much as possible - let the QEMM Optimize program set up your
config.sys and autoexec.bat files for you.

By the way, there's a helpful article in the latest PC Magazine
about Windows and QEMM -