Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!uupsi!sunic!dkuug!rcbal!neh
From: neh@rci.dk (Niels Erik Holm)
Newsgroups: comp.windows.ms.programmer
Subject: Codeview problems
Keywords: codeview
Message-ID: <1991Mar21.091710.3317@rci.dk>
Date: 21 Mar 91 09:17:10 GMT
Distribution: comp.windows.ms.programmer
Organization: RC International, Copenhagen, Denmark
Lines: 40

Maybe this question has been asked many times before, but I'm just started
programming Windows applications.

Problem :
=======================
I can't get Codeview for windows (CVW) to work.

I have installed a secondary monitory connected to a monochrome
display adapter. The DOS codeview CV and SYMDEB works fine, but
CVW fails. The following things happens:

1)	Windows is running in enhanced mode.

2)	When I start codeview (by clicking on the icon or from the Run
	command) the screen on the secondary monitor is cleared. The 
	timeglass icon displayed during load of codeview is removed as
	well.

3)	Appearently codeview is displaying some sort of error message
	on the secondary monitor, but unfortunately this is invisible.

4)	When I hit the RETURN key, control is returned to the program 
	manager, which now thinks it is using a monochrom monitor.
	(Dialogboxes is displayed in black/white).

I hope this topic has been discussed before, and look forward to get
some help. Any help is appreciated.

Niels Erik Holm
RC International
Denmark

Mail address: neh@rci.dk

---------------------------------------------------------------------------
Every day, once a day, give yourself a present. Don't plan it, don't wait
for it, just... let it happen.  Could be a new shirt at the men's store,
a catnap in your office chair, or two cups of good, hot, black coffee.
(Dale Cooper in Twin Peaks).
---------------------------------------------------------------------------