Xref: utzoo comp.periphs.scsi:2233 comp.sys.ibm.pc.hardware:6922 comp.unix.sysv386:6350
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!uwm.edu!ux1.cso.uiuc.edu!news.iastate.edu!sharkey!cfctech!teemc!ka3ovk!wb3ffv!imladris!srs!dlucy
From: dlucy@srs.UUCP (Doug Lucy)
Newsgroups: comp.periphs.scsi,comp.sys.ibm.pc.hardware,comp.unix.sysv386
Subject: How to connect a SMD drive to ISA bus
Keywords: SMD SCSI ADAPTEC
Message-ID: <420@srs.UUCP>
Date: 24 Mar 91 00:43:04 GMT
Followup-To: poster
Organization: S & R Software, Inc, Cockeysville, MD
Lines: 14

I want to use a large SMD based fujitsu hard drive with
a 386 ISA based sys V/386 3.2 system. Adaptec has a
controller that interfaces the SMD drive to a SCSI 
controller.

Has anyone tried anything like this? Can the drivers for
SCSI disks and tape drives that came with 3.2 be used?

Thanks in advance.
-- 
: "It's such a fine line between clever..."             :    Doug Lucy :
: "...and stupid."                                      : S&R Software :
:                                                                      :
:                 UUCP: uunet!aplcomm!aplcen!wb3ffv!imladris!srs!dlucy :