Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!gate.oxy.edu!nrc.com!kosman!kevin
From: kevin@kosman.UUCP (Kevin O'Gorman)
Newsgroups: comp.sys.3b1
Subject: HD2 upgrade -- some missing info
Message-ID: <1315@kosman.UUCP>
Date: 27 Mar 91 01:11:52 GMT
Organization: K.O.'s Manor - Vital Computer Systems, Oxnard, CA 93035
Lines: 22

I got my Priam drive from A Cano's group buy, my DRUN patch instructions,
a new soldering station, and I'm finally getting around to installing the
first of my two HD2 upgrades.  I think I'm about done, but...

(aside)
What was the short rope for? Hanging myself?  (See shopping list item 7
which says see intruction 17, which doesn't seem to use the rope...
oh, there are *two* instructions 17...).
(back to basics)

I'm about where I should do the initial 'smoke test'.  But the little
HD2 board has no clear indication of the location of pin 1 on the headers.
Moreover, I discover I don't have enough ribbon cable to try this on my
drive(s), and there is no indication of how to back out to P5.1 use.

I would like to know these things, just to be sure: where is pin 1, and
do I just plug my PAL back in to go back to P5.1?

-- 
Kevin O'Gorman ( kevin@kosman.UUCP, kevin%kosman.uucp@nrc.com )
voice: 805-984-8042 Vital Computer Systems, 5115 Beachcomber, Oxnard, CA  93035
Non-Disclaimer: my boss is me, and he stands behind everything I say.