Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!rutgers!cbmvax!cbmehq!cbmger!peterk From: peterk@cbmger.UUCP (Peter Kittel GERMANY) Newsgroups: comp.sys.amiga.emulations Subject: Re: BBoard Message-ID: <1028@cbmger.UUCP> Date: 28 Mar 91 13:18:27 GMT References: Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY) Organization: Commodore Bueromaschinen GmbH, West Germany Lines: 21 In article Erik_Whiteway@resbbs.UUCP (Erik Whiteway) writes: >Does anybody out there have a 2088bridge board that they use? I have one and >hardly use it. Anyone know if you can somehow use the amiga 3.5 interinal >drive with the board? Well, you can use it in a certain way, via the JLINK command (see manual), but then this floppy is still AmigaDOS format. Yet you can always use public domain (or commercial) tools like Messydos (CrossDOS, Dos2Dos) to read and write MS-DOS format on your Amiga drives. > Has anyone accelerated it or added more >mem? Thanks. Yes, some have used such "Above Boards" or 386sx accelerators (hmm, the latter perhaps only with the AT BB). There also exist little expansion cards to fill up the memory to 640 K and optionally provide a serial interface. -- Best regards, Dr. Peter Kittel // E-Mail to \\ Only my personal opinions... Commodore Frankfurt, Germany \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk