Newsgroups: comp.sys.apollo
Path: utzoo!utgpu!cunews!bnrgate!bwdls61!bwdla31!marmen
From: marmen@bwdla31.bnr.ca (Rob Marmen 1532773)
Subject: Daylight Savings Time and SR10.3
Message-ID: <1991Mar25.202013.27817@bwdls61.bnr.ca>
Keywords: DST TZ SR10.3
Sender: usenet@bwdls61.bnr.ca (Use Net)
Organization: Bell-Northern Research, Ottawa, Canada
Date: Mon, 25 Mar 1991 20:20:13 GMT

 I need a quick, simple answer to the following question:

 Does TZ set the timezone correctly under sr10.3?

 It's that time of the year again, and I was verifying that
TZ still changed the timezone on the workstation. It does,
but does seem to affect the output of the DATE command.

I thought that this command worked at one time, but I could
have been mistaken.

Anyway, am I wrong, or do I tell my users that they have to do a
SHUTDOWN and an EX CALENDAR to reset the time?

rob...
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
| Robert Marmen             marmen@bnr.ca  OR             |
| Bell Northern Research    marmen%bnr.ca@cunyvm.cuny.edu |
| (613) 763-8244         My opinions are my own, not BNRs |