Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!uunet!timbuk!marc
From: marc@sequoia.cray.com (Marc Bouron)
Newsgroups: comp.sys.atari.st
Subject: Re: Metafile --> DVI
Message-ID: <040625.9584@timbuk.cray.com>
Date: 27 Mar 91 15:13:12 GMT
References: <1991Mar26.051302.6007@nmt.edu>
Reply-To: marc@sequoia.cray.com (Marc Bouron)
Organization: Cray Research, Inc.
Lines: 29


In article <1991Mar26.051302.6007@nmt.edu>, eahsnsr@nmt.edu (Eric A. Hobbs) writes:
|> 
|> While I'm on the subject of conversion programs, is there an ST
|> program that will convert from Metafiles to DVI?
|> 
|> 
|> -------------
|> Eric A. HOBBS!
|> eahsnsr@JUPITER.nmt.edu
This solution may be a little `round the houses', but you could use the GEM2PS
utility to convert the metafile to PostScript, and use dvips to convert your
.DVI file.  Of course, this only works if you have access to a PostScript
printer...  :-)

GEM2PS can be found on atari.archive (I think) and dvips can be found virtually
ANYWHERE!  I've not tested GEM2PS, but I use dvips every day.


[M][a][r][c]


################################################################################
#                           #  marc@sequoia.cray.com           #     .   .     #
#  Marc CR Bouron           #  M.Bouron@cray.co.uk     (ARPA)  #    _|\ /|_    #
#  Cray Research (UK) Ltd.  #  M.Bouron@crayuk.uucp  (DOMAIN)  #   (_|_V_|_)   #
#  +44 344 485971 x2208     #  M.Bouron@uk.co.cray    (JANET)  #     |   |     #
#                           #  ...!ukc!crayuk!M.Bouron (UUCP)  #               #
################################################################################