Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!wuarchive!sdd.hp.com!news.cs.indiana.edu!noose.ecn.purdue.edu!mentor.cc.purdue.edu!sage.cc.purdue.edu!stevendd
From: stevendd@sage.cc.purdue.edu (Doug Stevens)
Newsgroups: comp.sys.atari.st
Subject: Switching A SS drive to DS
Keywords: Help me, Please...
Message-ID: <8889@mentor.cc.purdue.edu>
Date: 27 Mar 91 22:03:12 GMT
Sender: news@mentor.cc.purdue.edu
Lines: 9

I finally desided to upgrade my single sided drive, I just got the new drive
today.  I thought all I had to was swap drives.  The plug from the small board
in the drive case isn't the same as the one one the drive.  The connector on the
board is for 14 pins, the drive connector is 34 pins.  I rember reading some of
the early single sided drives used an old kind of connector (guess what kind I
got).  If you know how to convert the plugs I would be very appreciative.

Thanks.
- Doug