Xref: utzoo comp.sys.atari.st.tech:1773 comp.sys.atari.st:36518
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!udel!rochester!pt.cs.cmu.edu!o.gp.cs.cmu.edu!andrew.cmu.edu!mc4c+
From: mc4c+@andrew.cmu.edu (Mark Choi)
Newsgroups: comp.sys.atari.st.tech,comp.sys.atari.st
Subject: Re: connecting VGA mono monitor to ST
Message-ID: <gbvYfre00VIBI1qWQn@andrew.cmu.edu>
Date: 25 Mar 91 19:09:43 GMT
References: <69628@brunix.UUCP>,
	<2128@netmbx.UUCP>
Organization: Carnegie Mellon, Pittsburgh, PA
Lines: 12
In-Reply-To: <2128@netmbx.UUCP>

> Excerpts from netnews.comp.sys.atari.st: 24-Mar-91 Re: connecting VGA
> mono mon.. Hartmut Semken@netmbx.UU (1107)

> Multi scan monitors have a scan *range* rather than a scan *frequency*
> (horizontal again). If You pick a monitor with a scan range from
> 14.point.something to 38.point.something, all Youll need is a cable and
> a switch (to switch monochrome detect between ground and open)

And a few 38 ohm resistors on the colour lines would help a bit too.


				-GEISHA-