Path: utzoo!utgpu!cunews!bnrgate!bwdls58!mlord
From: mlord@bwdls58.bnr.ca (Mark Lord)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: Re: mixing 80ns and 100ns 1Mb RAM
Keywords: RAM
Message-ID: <6261@bwdls58.bnr.ca>
Date: 27 Mar 91 00:03:24 GMT
References: <1991Mar13.210952.26156@cbnewsm.att.com>
Sender: mlord@bwdls58.bnr.ca
Reply-To: mlord@bwdls58.bnr.ca (Mark Lord)
Distribution: na
Organization: Bell-Northern Research, Ottawa, Canada
Lines: 17

In article <1991Mar13.210952.26156@cbnewsm.att.com> wg@cbnewsm.att.com (Bill Gieske) writes:
<I am about to install 16 100ns 1Mb RAM chips in a 286 PC, along with
<2 80ns 1Mb chips.  If I can tell which slots are the parity bit slots,
<I'll put the 2 80ns chips there.  If not, they'll wind up in the first
<bit's slot.  Any problems with mixing these two faster chips with the 
<16 slower chips.  BTW, the other 4MB on my PC is 100 ns.  The PC is a
<16MHz 286 with NEAT Chipset.  Thanks in advance.

This should work just fine.

-- 
MLORD@BNR.CA  Ottawa, Ontario *** Personal views only ***
begin 644 NOTSHARE.COM ; Free MS-DOS utility - use instead of SHARE.EXE
MZQ.0@/P/=`J`_!9T!2[_+H``L/_/+HX&+`"T2<TAO@,!OX0`N1(`C,B.P/.DS
<^K@A-<TAB1Z``(P&@@"ZA`"X(27-(?NZE@#-)P#-5
``
end