Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!usc!wuarchive!zaphod.mps.ohio-state.edu!ncar!gatech!usenet.ins.cwru.edu!ncoast!allbery
From: allbery@NCoast.ORG (Brandon S. Allbery KB8JRR/AA)
Newsgroups: comp.sys.mac.apps
Subject: Re: Mainframe (C-TeX) pk fonts for OzTeX?
Message-ID: <1991Mar26.031908.15287@NCoast.ORG>
Date: 26 Mar 91 03:19:08 GMT
References: <19856@brahms.udel.edu>
Reply-To: allbery@ncoast.ORG (Brandon S. Allbery KB8JRR)
Followup-To: comp.sys.mac.apps
Organization: North Coast Public Access Un*x (ncoast)
Lines: 26

As quoted from <19856@brahms.udel.edu> by mchupa@brahms.udel.edu (Michael A Chupa):
+---------------
| of TeX. Does anyone out there have experience in (successful)
| Kermit'ing down of .tfm and .pkxxx files? I have been able to
| successfully install several .tfm files, but OzTeX complains
| of 'bad fixwords' in the pk files I have installed.
+---------------

I built and successfully copied and used several fonts for OzTeX before taking
it of my disk (40MB can fill up surprisingly quickly... and I don't have a PS
printer or an ImageWriter, so OzTeX is less than useful to me --- neither the
Grappler nor PrintLink worked quite right with it).

Quick notes:

(1) Make sure you use binary mode in the file transfer.
(2) Endianness doesn't matter --- I built the fonts on a 486.
(3) I did this in an earlier version of OzTeX than the current one.  It *is*
    possible that a small buglet managed to creep in along the line....

++Brandon
-- 
Me: Brandon S. Allbery			  Ham: KB8JRR/AA on 2m, 220, 440, 1200
Internet: allbery@NCoast.ORG		(QRT on HF until local problems fixed)
America OnLine: KB8JRR // Delphi: ALLBERY   AMPR: kb8jrr.AmPR.ORG [44.70.4.88]
uunet!usenet.ins.cwru.edu!ncoast!allbery          KB8JRR @ WA8BXN.OH