Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!rex!ukma!usenet.ins.cwru.edu!eagle!opus!eddc
From: eddc@opus.lerc.nasa.gov (Dave Carek)
Newsgroups: comp.sys.sgi
Subject: Re: How to use DEC VMS from SGI telnet window running as iris-ansi-net type
Message-ID: <1991Mar25.164603.18456@eagle.lerc.nasa.gov>
Date: 25 Mar 91 16:46:03 GMT
References: <910313120022.27405a95@FNALA.FNAL.GOV> <6478@oasys.dt.navy.mil> <6534@oasys.dt.navy.mil>
Sender: news@eagle.lerc.nasa.gov
Reply-To: eddc@opus.UUCP (Dave Carek)
Organization: NASA/Lewis Research Center, Cleveland
Lines: 46

In article <6534@oasys.dt.navy.mil> hendrix@dtoa1.dt.navy.mil (Dane Hendrix) writes:
>In article <6478@oasys.dt.navy.mil> hendrix@dtoa1.dt.navy.mil (Hendrix) writes:
>>In article <910313120022.27405a95@FNALA.FNAL.GOV> HERBER@FNALA.FNAL.GOV ("Rando
>>lph J. Herber, CD/DCD/SP, x2966") writes:
>>>From:   FNDCD::NAGY         "Frank J. Nagy:VAX Wizard&Loose Cannon" 12-MAR-199
>>1
>>>Subj:   RE: Can you help?  Would you help?
>>>
>>>The answer to using telnet from an SGI (iris-ansi-net terminal type)
>>>on VMS is to SET TERMINAL/ANSI after you login.
>>
>This still doesn't seem to work for me when I try to use TPU or EDT editors.
>Specifically, when I scroll down through the file (using the arrow keys)
>only the bottom line of
>the screen changes.  I have set screen size to 24x80 on SGI.  If you have
>something that works please mail or post the output from show terminal on
>the VAX.  BTW I'm using VMS4.6 and Wollongong WIN/TCP 3.1 (maybe 3.2),
>IRIX 3.3.1 on a 4D/85GT
>
>
>I have also tried setting the terminal on the VAX to
>SET TERM/WIDTH=80/PAGE=24/ANSI/INSERT/TAB
>same problem.
>
>hendrix@dtoa1.dt.navy.mil


This problem exists when a SET TERM/DEV=VT100 (or whatever VT device) gets
executed from your LOGIN.COM or the system SYLOGIN.COM on the vax. It    
doesn't matter if you subsequently issue the SET TERM/ANSI after because
the device will still be set to VT00.  To fix this, change any 
SET TERM/DEV=VTXXX in your LOGIN.COM to SET TERM/ANSI/DEV=UNKNOWN or add the 
SET TERM/ANSI/DEV=UNKNOWN to your LOGIN.COM if no SET TERM/DEV=XXX line exists.

I recommend putting it in as the last line in your LOGIN.COM


--
-----------------------------------------------------------------------
| David Carek                   |   phone: 216-433-8396               |
| NASA Lewis Research Center    |                                     |
| Cleveland, Ohio  44135        |   email: eddc@opus.lerc.nasa.gov    |
|---------------------------------------------------------------------|
| Engineer -> An innovative imaginative scientist who must design the |
|       improbable using the impossible on a budget that is invisible |
-----------------------------------------------------------------------