Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!spool.mu.edu!uunet!sco!paulz From: paulz@sco.COM (W. Paul Zola) Newsgroups: comp.unix.sysv386,sco.opendesktop Subject: Re: Colorado Tape driver for SCO UNIX (wanted) Summary: CMS not supported by SCO Message-ID: <15775@scorn.sco.COM> Date: 28 Mar 91 20:23:09 GMT Article-I.D.: scorn.15775 References: Sender: news@sco.COM Organization: The Santa Cruz Operation, Inc. Lines: 44 In article dmit@jet.lat.su writes: }I use SCO Open Desktop and I own Colorado Tape Backup System JUMBO KE-10 (60 }MB) with tape adaptor. As mentioned in the documentation for Tape, it support }QIC-40 format.But when I install it in Open Desktop as QIC-40 Cartidge Tape, }I doesn't get any result. } }Is anybody know from where I can downloaded JUMBO KE-10 driver for SCO Unix? } }I'll be very obligated. } } Serge-- } Serge Dmit | Latvian Canadian Joint Venture "JET" } Software Manager | 25 Bruninieku Str. Riga, 266001 Latvia } tlx: 161108 JET SU | E-mail - dmit@jet.lat.su I'm posting this because I think it might be of general interest. The Colorado Memory Systems JUMBO tape is not supported by any SCO driver. The QIC-40/QIC-80 driver will not work with this unit. This driver supports the following drives for ISA class architectures: Vendor Qic-40 ====== =============== Alloy APT-40/Q Mountain TD44-40 Tecmar QT-40i Wangtek FAD 3500,3040F While tape driver support is a very fluid thing, I am reasonably sure that any floopy tape not in this list will not work with the QIC-40 drivers supplied with ODT. I believe that CMS has a driver for SCO UNIX systems: you'll have to contact them to obtain a driver for your unit. I hope this helps you with your problem. - Paul Zola Software Support Engineer paulz@sco.COM Gotta tend the earth if you want a rose. - Emily Saliers DISCLAIMER: I speak for myself, and not for SCO.