Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!apple!agate!usenet.ins.cwru.edu!slc6!lim From: lim@slc6.INS.CWRU.Edu (Hock Koon Lim) Newsgroups: comp.dcom.sys.cisco Subject: Re: Get 8.2(2) for STS-10x's Message-ID: <1991Apr3.151424.21787@usenet.ins.cwru.edu> Date: 3 Apr 91 15:14:24 GMT References: Sender: news@usenet.ins.cwru.edu Reply-To: lim@po.CWRU.Edu Organization: Case Western Reserve Univ. Cleveland, Ohio, (USA) Lines: 26 Nntp-Posting-Host: slc6.ins.cwru.edu In article kla@kampi.hut.fi (Kimmo Laaksonen) writes: > >I FTP'd the new version 8.2(2) from ftp.cisco.com, netbooted that >on the servers, and now they've been running smoothly for a couple >of weeks. Although I've seen memory exhaustion again, but it seems >to have vanished later automagically. The release notes mention two >bug fixes in 8.2(2) pertaining to our problems: lines not getting reset >to default configuration after exit (maybe somebody played with parity >& databits on that line with 7 databits), and memory management problems >(in STS-10x's). Anyway, if you're having problems with 8.2(1), I suggest >you get 8.2(2) and try that. I would like to know how you ftp the 8.2 version and update your server through netbooted. I understand that software upgrade with eprom exchange will cost me $500. It will take some time get it done. If I can just ftp the image over the net and netbooted the server, it will save me a lot of time. I will be able to stay up-to-date on the software release too. -- Hock-Koon Lim, Information Network services Case Western Reserve University; Cleveland, Ohio, USA 44106 (216) 368-2982 lim@ins.cwru.edu