Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!ucsd!nosc!baron!baron!pnet07!donm
From: donm@pnet07.cts.com (Don Maslin)
Newsgroups: comp.os.cpm
Subject: Re: CP/M Sector Interleave
Message-ID: <1991Mar30.194503.25246@simasd.uucp>
Date: 30 Mar 91 19:45:03 GMT
Sender: pnet@simasd.uucp (People-NET)
Organization: People-Net [pnet07], San Diego, CA
Lines: 17

roadhog@austex (Lindsay Haisley) writes:
>I would also appreciate help from anyone who can give me precice definitions 
>of the terms skew and interleave.  I was under the impression that these 
>terms were the same, referring to the physical spacing between succcessive 
>logical sectors needed to optimize access times, however some of my recent
>reading has led me to believe that these terms are not interchangable.
>
It is my understanding that proper usage speaks to interleave on a disk
surface, and skew speaks to the positional relationship of corresponding
sectors on different surfaces.  That is, interleave is intended to allow for
processing time that the controller needs after reading one sector and before
reading the next.  Skew, somewhat similarly, is intended to account for the
processing time that the controller needs when switching read heads.

Keeper of the CP/M System Disk | UUCP: {nosc ucsd crash ncr-sd}!pnet07!donm
Archives for the Dino(saur)SIG | ARPA: simasd!pnet07!donm@nosc.mil
- San Diego Computer Society - | INET: donm@pnet07.cts.com