Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!uupsi!sunic!news.funet.fi!uwasa.fi!ts
From: ts@uwasa.fi (Timo Salmi)
Newsgroups: comp.os.msdos.programmer
Subject: Re: Cursor invisible after MSQuickBasic
Message-ID: <1991Apr3.123812.28157@uwasa.fi>
Date: 3 Apr 91 12:38:12 GMT
References: <1991Apr3.090133.1@csc.anu.edu.au>
Organization: University of Vaasa
Lines: 18

In article <1991Apr3.090133.1@csc.anu.edu.au> imj502@csc.anu.edu.au writes:
>
>I am hoping that somebody can help me with an annoying problem I am having with
>an MSQuickBasic 4.0 program.  The problem is that upon exiting the program the 
>DOS cursor is invisible until something like a DIR is done.  It is most
>disconcerting to be faced with a screen with no cursor.  
:

I don't know the cause of the problem, but you could temporarily
treat the symptom by putting your basic invokation in a batch file
having e.g.  a reset.exe (from /pc/ts/tsutil31.arc) command, or
something similar, as the last command of your batch file. 

...................................................................
Prof. Timo Salmi        
Moderating at garbo.uwasa.fi anonymous ftp archives 128.214.12.37
School of Business Studies, University of Vaasa, SF-65101, Finland
Internet: ts@chyde.uwasa.fi Funet: gado::salmi Bitnet: salmi@finfun