Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!apple!netcom!amdcad!sun!aeras!ys2!luis
From: luis@ys2.uucp (Luis Chanu)
Newsgroups: comp.periphs
Subject: NEED INFO on Strobe 260 Plotter...
Message-ID: <1991Mar28.071840.11631@ys2.uucp>
Date: 28 Mar 91 07:18:40 GMT
Distribution: usa
Organization: Glenmoor Data
Lines: 23

I just finished picking up a STROBE 260 plotter, and am trying to communicate
with it.  I has an RS-232 port, and I currently have it selected to 9600
baud, no parity, FYI.

My real question is what is it compatible with?  And, does anyone have a
manual on one?  ANY information would be appreciated...  Please reply
via E-mail, since I normally don't read this SIG.  Thank You for your
time...

-------------------------------------------------------------------------------
Luis Chanu  /  Awesome Possum         "Live every day as if it were your last,
                                         because one day you will be right."
UUCP: luis@ys2
 or                                    "The nice thing about standards is that
UUCP: ...grinch!luis                      there are so many to choose from."

              Disk-Claimer: That's not your disk, that's my disk.
-------------------------------------------------------------------------------
-- 
-------------------------------------------------------------------------------
Luis Chanu  /  Awesome Possum         "Live every day as if it were your last,
                                         because one day you will be right."
UUCP: ...sun!aeras!grinch!luis