Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!sun-barr!newstop!texsun!letni!rwsys!merch!cpe!adaptex!adaptx1!neese
From: neese@adaptx1.UUCP
Newsgroups: comp.periphs.scsi
Subject: Re: Fujitsu 1.2Gb drive
Message-ID: <283400087@adaptx1>
Date: 31 Mar 91 02:29:36 GMT
References: <12284@jet.uucp>
Lines: 16
Nf-ID: #R:jet.uucp:12284:adaptx1:283400087:000:661
Nf-From: adaptx1.UUCP!neese    Mar 29 09:21:00 1991


>/* ---------- "Fujitsu 1.2Gb drive" ---------- */
>Does anyone have experience using the above drive ? Any problems ?
>
>If anyone has used it with the Adaptec EISA SCSI controller (1740),
>especially under ISC unix, how fast is it ?

As a matter of fact, I have the exact setup you described running on a
HP Vectra 486 EISA system.  Works fine, although the CDC/Imprimis/Seagate
Wren VII SCSI-2 drive is faster.  Fast is a very subjective term under
UNIX, but between these two drives, I haven't found a faster combination.

			Roy Neese
			Adaptec Senior SCSI Applications Engineer
			UUCP @  neese@adaptex
				uunet!cs.utexas.edu!utacfd!merch!adaptex!neese