Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!emory!att!ucbvax!pro-nbs.cts.com!lhaider From: lhaider@pro-nbs.cts.com (Laer Haider) Newsgroups: comp.sys.apple2 Subject: Re: Agate Message-ID: <884.apple.a2.net@pro-nbs> Date: 30 Mar 91 04:42:03 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 30 In-Reply-To: message from WAXMONRW@SNYBUFVA.BITNET >I have replaced MS/DOS's Kermit with Telix; it has the Kermit protocol >built in and is easier to use. To use Telix you would need a new driver, >one which is available on GENIE. Without the driver, Telix does not work >on most (but not all PCTs). What driver is that? If it is PD or SW, could you mail me a ZIP'd copy? I've been having buku problems trying to run telecom programs on the PCT. AE tells me that there is no current fix for it, and they don't plan to release any fixes. It's just one of the limitations of the card (their support for Apple II products is going to hell). In case you're wondering what I'm talking about, it's that the PCT drops characters whenever it is sending data to a storage device; whether it's a floppy or a RAM disk. This makes it nearly impossible to get a download through the PCT. That was great news to get at a $1.50 a minute! And I was just trying to order the new version of the PCT software, for $39.00 + shipping! I WILL NEVER PURCHASE ANOTHER APPLIED ENGINEERING PRODUCT, **EVER**! / _______________________________________________ \ / / ProLine: pro-nbs!lhaider \\\' , / // INET: lhaider@pro-nbs.cts.com \\\//, _/ //, UUCP: crash!pro-nbs!lhaider \_-//' / //<, ARPA: crash!pro-nbs!lhaider@nosc.mil \ /// > \\\`__/_ /,)-^>>\` , \\\ The opinions express here are just opinions. (/ \\ /\\\ Don't have a cow man! // _//\\\\ ----------------------------------------------- ((` ((