Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!jarthur!nntp-server.caltech.edu!madler
From: madler@nntp-server.caltech.edu (Mark Adler)
Newsgroups: comp.sys.handhelds
Subject: Re: Interface cable for the NeXT
Message-ID: <1991Apr3.183024.25617@nntp-server.caltech.edu>
Date: 3 Apr 91 18:30:24 GMT
References: <SCD.91Mar28162257@timaeus.math.ufl.edu> <1991Apr3.164149.19643@jhereg.osa.com>
Distribution: comp.sys.handhelds
Organization: California Institute of Technology, Pasadena
Lines: 12

In article <1991Apr3.164149.19643@jhereg.osa.com> andrew@jhereg.osa.com (Andrew C. Esh) writes:
>/dev/ttyb. I find it easiest to set up a send on the NeXT and then operate
>the receive on the 48sx manually. I tried the server mode on the 48sx, but
>I ran into a few problems and gave up. I forget what the problems were.

I have had no problems whatsoever using the server mode on the 48 from
my NeXT, or vice-versa (using the server mode on the NeXT from 48).  I
am using version 5A(165) of kermit, but it worked fine when I was using
version 4E of kermit as well.

Mark Adler
madler@pooh.caltech.edu