Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!apple!snorkelwacker.mit.edu!thunder.mcrcim.mcgill.edu!quiche!tinyguy
From: tinyguy@cs.mcgill.ca (Yeo-Hoon BAE)
Newsgroups: comp.sys.ibm.pc.hardware,connect.audit
Subject: Re: Conner 200M IDE drive
Message-ID: <1991Apr3.113533.1777@cs.mcgill.ca>
Date: 3 Apr 91 11:35:33 GMT
References: <1991Mar31.162532.9509@ibmpcug.co.uk> <1991Apr3.035310.11481@jwt.UUCP>
Sender: news@cs.mcgill.ca (Netnews Administrator)
Organization: SOCS, McGill University, Montreal, Canada
Lines: 22

In article <1991Apr3.035310.11481@jwt.UUCP> john@jwt.UUCP (John Temples) writes:

>In article <1991Mar31.162532.9509@ibmpcug.co.uk> hdrw@ibmpcug.co.uk (Howard Winter) writes:
>>2. What is the achievable data-transfer rate ?
>
>I've used the CP3204 under both DOS and UNIX, and the transfer rate was
>looser interleave.
>
>>I am hoping for about 1M/Sec from the Conner.  Is this possible ?
>
>-- 
>John W. Temples -- john@jwt.UUCP (uunet!jwt!john)


I have used the 105Meg version of Conners SCSI drive, and although I'm
running it on Amiga with DMA controller, it gives roughly 600-750k/s
depending on the environment... I'm sure 200Megger is faster, given
the right controller...



-TG