Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!uunet!safn2!rey From: rey@safn2.UUCP (rey) Newsgroups: comp.sys.ncr Subject: Problem with uucico - lost line - on 450/32 Unix 3.00.01. Keywords: modem, uucico Message-ID: <1429@safn2.UUCP> Date: 3 Apr 91 19:16:08 GMT Organization: Southern Aluminum Finishing, Atlanta, GA Lines: 90 I cannot reliably Poll with uucp because it fails about 1/2 the time. The result is usually a success one hour later. An hour later than I need it to be. CODAR told me I have a bad modem. I do not believe that. Modems are Hayes 2400. tty20 and tty21 behave the same. 1200 and 2400 behave the same. Failures are not related to machine load, happening at all hours. There must be something wrong with the hpsio driver. Has anyone had better luck? I have seen several knocks of the hpsio in this group. Can it really be "non-functional"? I have used it for several years on various releases. I have also looked at getty_ps from comp.sources.misc (unix?); but I have not been able to make it work. I do not think this problem has anything to do with getty now; although I once thought that I might solve the problem by having the better modem control of getty_ps. Output from "Uutry -r safn1" follows: mchFind called (safn1) conn(safn1) Device Type ACU wanted mlock tty21 succeeded processdev: calling setdevcfg(uucico, ACU) gdial(hayes12) called expect: ("") got it sendthem () CLOCAL set DELAY AT^M) expect: (OK^M) lost line errno - 0 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^About 50% of the time. set interface UNIX mlock tty20 succeeded processdev: calling setdevcfg(uucico, ACU) gdial(hayes12) called expect: ("") got it sendthem () CLOCAL set DELAY AT^M) expect: (OK^M) AT^M^M^JOK^Mgot it sendthem (AT&D3V1Q0E1S0=1&C1&S1M0&J0B1^M) expect: (OK^M) ^JAT&D3V1Q0E1S0=1&C1&S1M0&J0B1^M^M^JOK^Mgot it sendthem (ECHO CHECK ON A^JATTDDTT,,??????^M^M) expect: (CONNECT) ^M^JCONNECTgot it sendthem () CLOCAL clear ) getto ret 6 expect: ("") got it sendthem (^MDELAY ^M^M) expect: (ogin:) Continues to "Successful" Devices file follows: Direct tty21 - 2400 direct ACU tty21,M - 2400 hayes24 \T ACU tty21,M - 1200 hayes12 \T ACU tty20,M - 2400 hayes24 \T ACU tty20,M - 1200 hayes12 \T Dialers file excerpt follows: The \M \m is new in rel 3. \M sets port CLOCAL. # Gold Star 2400 GoldStar =,- "" \M\dAT\r\c OK\r \dAT&D2V1QE1S0=1&C1&S1&JB1\r\c OK\r \EATDT\T\r\c CONNECT \m\c # &C1 and &S1 required for logon. hayes12 =,-, "" \M\dAT\r\c OK\r AT&D3V1Q0E1S0=1&C1&S1M0&J0B1\r\c OK\r \EATDT\T\r\c CONNECT \m\c hayes24 =,-, "" \M\dAT\r\c OK\r AT&D2V1Q0E1S0=1&C1&S1M0&J0B1&W\r\c OK\r \EATDT\T\r\c CONNECT \m\c Thanks in advance for any help. -- Reynolds McClatchey (Southern Aluminum Finishing Co, Atlanta, GA, USA) Architectural Aluminum. Custom Fabrication. Paint, Powder Coating, Anodizing. uunet!safn2!rey MCImail 414-2935