Path: utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request
From: marty@wuphys.wustl.edu (Marty Olevitch)
Newsgroups: comp.sys.sun
Subject: rst0 vs. rst8
Keywords: Miscellaneous
Message-ID: <2202@brchh104.bnr.ca>
Date: 26 Mar 91 16:00:00 GMT
Sender: news@brchh104.bnr.ca
Organization: Sun-Spots
Lines: 6
Approved: Sun-Spots@rice.edu
X-Original-Date: Mon, 25 Mar 91 15:53:11 CST
X-Sun-Spots-Digest: Volume 10, Issue 69, message 13
X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu

What's the difference in using /dev/rst0 versus using /dev/rst8?  The
device is an exabyte 8mm cartridge tape drive, Sparcstation 1+, SunOS 4.1.
We have some programs that work fine using 0, but fail after reading okay
for a while using 8.

Marty Olevitch				Internet: marty@wuphys.wustl.edu