Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!bu.edu!m2c!wpi.WPI.EDU!acoolidg
From: acoolidg@wpi.WPI.EDU (Aaron P Coolidge)
Newsgroups: comp.windows.ms
Subject: HELP! WD7000 + 386Enh = CRASH!!!
Message-ID: <1991Mar27.013413.5732@wpi.WPI.EDU>
Date: 27 Mar 91 01:34:13 GMT
Organization: Worcester Polytechnic Institute
Lines: 40


	Help! I just got a WD7000 SCSI controler. Now, my win3 will not run
in 386 enhanced mode- it gets to the banner, and then i get the "C:\"
prompt back! 
	I had been running windows in 386enh for almost 6 months with my old
controler/drive, so I don't believe it's the machine.

	I have put the following lines in the [386enh] section of SYSTEM.INI:

VirtualHDIRQ=false
emmexclude=ce00-cfff

And it still doesn't work. The card's bios is mapped to ce00-cfff, confirmed
in the manual and quarterdeck's manifest. 
	Does anyone have a WD7000 and is running win3 in 386enh? If so, what
did you have to do?

SYSTEM SPECS:

	16MHz 386sx
	4MB RAM
	V7 1024i
	Adlib
	2 ser /1 par/ 1 game

	running ms-dos 3.31 (NEC)
	using himem.sys
	loading only logitech's mouse driver as a TSR.

	NOT USING THE WESTERN DIGITAL TSRS!!!!
	The SCSI is fdisked & formatted with dos.

	WD7000 BIOS rev. 3.34

Any help would be appreciated!!!!

-- 
Aaron Coolidge
               acoolidg@wpi.wpi.edu    bitnet:sorry, use a gateway.
        "I'm always in control of my car.  Well, at least 70% of the time."