Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!cs.utexas.edu!uunet!sjsca4!danda
From: danda@sj.ate.slb.com (Jeff Danda)
Newsgroups: comp.windows.ms
Subject: floppy/tape as drive b: under Windows...
Message-ID: <1991Apr3.180821.25174@sj.ate.slb.com>
Date: 3 Apr 91 18:08:21 GMT
Reply-To: danda@sj.ate.slb.com (Jeff Danda)
Organization: Schlumberger Technologies, San Jose, CA.
Lines: 14



I have a Colorado tape drvie hooked to my pc as an extension to drive b:
Apparently if you already have a floppy setup as b: drive Colorado
supplies you with a single floppy drive cable that connects drives A:,
B: and the tape unit together.  This setup eliminates the need for a 
separate tape controller card.  Anyway, when I try to access the tape drive
via a windows icon I get an error message "Tape controller not found".

When I access the tape drive from the DOS prompt everything works fine.

Any ideas?

Jeff Danda