Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!uunet!timbuk!web!us267388
From: us267388@mmc.mmmg.com (Bradley D. Rhoades)
Newsgroups: comp.dcom.sys.cisco
Subject: NETBios LAN connection?
Keywords: NETBios
Message-ID: <1991Apr3.195016.1768@mmc.mmmg.com>
Date: 3 Apr 91 19:50:16 GMT
Sender: us267388@mmc.mmmg.com (Bradley D. Rhoades)
Reply-To: us267388@mmc.mmmg.com (Bradley D. Rhoades)
Organization: 3M/Metal Matrix Composites Department
Lines: 20


	I have a PC LAN in a manufacturing environment here that is
	running NETBios between PC's over ethernet.  I would like
	to connect the PC LAN to our TCP/IP network using our Cisco
	AGS.  I haven't seen anything in the Cisco Manuals about routing
	NETBios, so I am assuming I will need to bridge the protocol.
	
	Does anyone have any experience with NETBios and the Cisco routers?
	Do I really need to Bridge the protocol?

	Thanks for any help.  I will summarize to the list.

	Brad


-- 
Bradley D. Rhoades	          E/Mail: bdrhoades@mmc.mmmg.com
3M, 2465 Lexington Ave So         NIC: BR79
Building 60-1N-01                 WRK: +1 (612) 736 2874
Mendota Heights, MN  55120        FAX: +1 (612) 736-0431