Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!uunet!mcsun!ukc!acorn!unipalm!ian
From: ian@unipalm.uucp (Ian Phillipps)
Newsgroups: comp.protocols.nfs
Subject: Re: Using PC-nfs on wd8003 with 386max
Keywords: PC-nfs, 386max, wd8003e
Message-ID: <1991Apr8.122922.8778@unipalm.uucp>
Date: 8 Apr 91 12:29:22 GMT
References: <1121@eba.eb.ele.tue.nl>
Organization: Unipalm Ltd., Cambridge, England
Lines: 23

wjw@ebh.eb.ele.tue.nl (Willem Jan Withagen) writes:

>Just another silly question:
>	Is anybody using the above combination?
>	if so could you mail me your config.sys for this?

>I would like to run to, but have not yet managed to get the 386max part
>up and running. It just runs fine in low memory.

Here's a working combination - note that WD8003E.SYS is in low memory
The WD card has its memory at C800, to avoid splitting up a big area.

I also had KEYB in high memory.

DEVICE=C:\386MAX\386MAX.SYS NOROM EXCLUDE=c800-cc00
DEVICE=C:\DOS\ANSI.SYS
DEVICE=C:\386MAX\386LOAD.SYS prog=C:\DFIMOUSE\DFIMOUSE.SYS 2
FILES=20
DEVICE=C:\386MAX\386LOAD.SYS size=66784 prog=C:\NFS\PCNFS.SYS
DEVICE=C:\386MAX\386LOAD.SYS prog=C:\NFS\SOCKDRV.SYS
DEVICE=C:\NFS\WD8003E.SYS /mc800
BREAK=ON
LASTDRIVE=V