Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!spool.mu.edu!news.cs.indiana.edu!ux1.cso.uiuc.edu!yoyodyne!cwilson
From: cwilson@yoyodyne.ncsa.uiuc.edu (Chris Wilson)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: Trying to get WD8003E driver working...
Message-ID: <1991Apr6.191659.3233@ux1.cso.uiuc.edu>
Date: 6 Apr 91 19:16:59 GMT
Article-I.D.: ux1.1991Apr6.191659.3233
References: <27FD307C.11763@orion.oac.uci.edu>
Sender: usenet@ux1.cso.uiuc.edu (News)
Distribution: usa
Organization: National Center for Supercomputing Applications at Urbana Illinois
Lines: 21

In article <27FD307C.11763@orion.oac.uci.edu> jstern@orion.oac.uci.edu (Jeff Stern) writes:
>
>I am trying to get 
>
>I have a WD8003E board, and am trying to run NCSA Telnet using the
>packet-driver, but am having no luck.  I load the driver with:
> config.tel set to:
>	hardware=packet
>	ioaddr=60
>
>Jeff Stern.
>------------------------->jstern@orion.oac.uci.edu<-------------------------

Config.tel should be set to:
	hardware=packet
	interrupt=60
(i.e. interrupt, not ioaddr.)

-Chris Wilson
 Programmer, NCSA PC Telnet
 cwilson@ncsa.uiuc.edu