Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!orion.oac.uci.edu!jstern
From: jstern@orion.oac.uci.edu (Jeff Stern)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Post #2: Trying to get WD8003E driver working with Telnet...
Message-ID: <2800ABE5.26929@orion.oac.uci.edu>
Date: 8 Apr 91 17:44:05 GMT
Sender: jstern@orion.oac.uci.edu (Jeff Stern)
Distribution: usa
Organization: University of California, Irvine
Lines: 25


Thanks everyone for your suggestions, *BUT* I have as yet been
unsuccessful getting telbin.exe to work with the WD8003E packet
driver.  In my packet driver command line I have tried 0x3 instead of
3; in CONFIG.TEL I have tried interrupt=60 instead of ioaddr=60; both
interrupt=0 and address=0; and many combinations of above, all to no
avail.

I *am*, however, successful using *POPmail* and this WD8003E driver,
when I load the driver with the command,
	WD8003E 0x60 0x5 0x280 0xD000
(I am now using interrupt 5, not 3).  POPmail (the Beta version) works
perfectly with this driver, as far as I can tell.

Therefore, I am led to believe it is some configuration of my
CONFIG.TEL file I have not yet tried which will do the trick.

Therefore, if someone *is using* telbin.exe successfully with
the *packet driver* (not the direct hardware) for the WD8003E, I would
appreciate it if they sent me

1) the command line they load the WD8003E driver with, AND
2) their CONFIG.TEL file.

Thanks.  Jeff Stern.